Advanced PCB
High Frequency PCB
Rogers, Taconic and Isola laminates for RF, microwave and high-speed digital circuits.
Overview
High-frequency boards depend on a stable dielectric constant and low loss tangent, so material handling and etch compensation matter more than on standard FR-4. Aisler processes Rogers, Taconic, Isola and Arlon laminates, including hybrid stack-ups that mix high-frequency prepreg with FR-4 to control cost. Etch factor is adjusted per material to hold the impedance your simulation assumed.
Key construction features
- Rogers RO4000 / RO3000, Taconic RF, Isola and Arlon laminates
- Hybrid stack-ups mixing high-frequency and FR-4 prepreg
- Material-specific etch compensation for impedance accuracy
- Back-drilling available to reduce stub length on high-speed vias
Manufacturing specifications
Standard production capability for high frequency pcb. Tighter limits are confirmed during DFM review.
| Layer count | 2 - 24 layers |
|---|---|
| Dk range | 2.2 - 10.2 depending on laminate |
| Board thickness | 0.2 - 3.2 mm |
| Impedance tolerance | ±7% on qualified stack-ups |
| Surface finish | ENIG, immersion silver, hard gold |
| Lead time | 5 - 15 working days |
Typical applications
- 5G and telecommunication base station radios
- Radar, satellite and microwave modules
- ADAS radar and V2X automotive antennas
- High-speed digital backplanes and network switches
Related products
Ready to start your project?
Send your Gerber files for a quote. Simple boards are quoted within 1 hour, complex builds within 24 hours.